HDMI EXTENDERS

HDMI Extender Illustration

The MM60-050 mini has a full IR return path and with the supplied IR emitter and receiver can operate the HDMI source equipment from the receiver point.

The MM60-050 is powered at 5V from the transmitter only and the receiver is powered via the CAT5e/6 cable reducing the required power points and making for neater and simple installation.

HDMI-Extender

MM60-050

  • HDMI loop-through
  • IR return
  • Single end powering
  • EDID Mode
  • HDCP 1.4
  • Supplied with 5V 1A PSU
  • Supports 3D format
  • PoE

The MMS MM60-050 HDMI extender over a single CAT5e/6 cable with IR extends high definition video and audio signals with an IR return path over 50m. This unit has EDID management allowing source and display handshake for optimum display performance. MM60-050 extender incorporates an HDMI loop-through at the transmitter for a local TV display at the source avoiding the need of an additional HDMI splitter.  The receiver incorporates equalisation DIP switches for optimising the signal over different lengths of cat5e/6 cable for super reliable performance in any installation.

Convenient PoE powering is built in to the transmitter removing the need for power supplies at both the transmitter and receiver making installation easier, neater and more convenient.

MODELMM60-050 (EX50T) (EX50R)
VIDEO BANDWIDTH165MHz (4-95Gbps)
VIDEO SUPPORT480i, 480p, 720p 1080i, 1080p @ 60Hz
TRANSMISSION RANGEHD 1080p 24bit colour up to 50m (164ft)
INPUT TMDS SIGNAL3.3 volts
INPUT DDC SIGNAL5.0V / P-P
HDMI CONNECTORType A 19 pin female
RJ-45 CONNECTORWE/SS 8P8C
IR CONNECTOR3.5mm TX & RX IR Receiver & Transmitter
HOUSINGPressed steel enclosure with powder coat finish
ESD PROTECTIONHuman Body Model +/- 8kV (air-gap) +/-4kV (contact discharge)
POWER CONSUMPTION1.5W (TX) 1W (RX)
POWER SUPPLY5V 1.0A DC
OPERATING TEMPERATURE0ºC to 40ºC

HDMI-Extender

MM60-051

  • HDMI loop-through
  • IR return
  • Single end powering
  • Auto EDID
  • HDCP 1.4
  • Supplied with 5V 1A PSU
  • Supports 3D format
  • PoE

The MMS MM60-051 HDMI extender with PoE over a single CAT5e/6 cable with IR extends high definition video and audio signals with an IR return path over 50m. This unit has Auto EDID management allowing source and display handshake for optimum display performance. MM60-050 extender incorporates an HDMI loop-through at the transmitter for a local TV display at the source avoiding the need of an additional HDMI splitter.

MM60-051 supports full IR reverse path from the receiver back to the transmitter via the cat5e/6 cable allowing the supplied IR “eye” and “emitter” to communicate the remote control codes of the source device making control of the source device at the viewing location very convenient.

MODELMM60-051 (EX51T) (EX50R)
VIDEO BANDWIDTH165MHz (4-95Gbps)
VIDEO SUPPORT480i, 480p, 720p, 1080i, 1080p @60Hz
TRANSMISSION RANGEHD 1080p 24bit colour up to 50m (164ft)
INPUT TMDS SIGNAL3.3 volts
INPUT DDC SIGNAL5.0V / P-P
HDMI CONNECTORType A 19 pin female
RJ-45 CONNECTORWE/SS 8P8C
IR CONNECTOR3.5mm TX & RX IR Receiver & Transmitter
HOUSINGPressed steel enclosure with powder coat finish
ESD PROTECTIONHuman Body Model +/- 8kV (air-gap)
+/-4kV (contact discharge)
POWER CONSUMPTION1.5W (TX) 1W (RX)
POWER SUPPLY5V 1.0A DC
OPERATING TEMPERATURE0ºC to 40ºC

Contact Details

Here's how to contact us
© Multimedia Solutions™ 2017. Reproduction prohibited. All specifications and details are for guidance only and are correct at time of going to print and are subject to change. Check details before purchase and use. Images are for illustration only and some products may vary from those shown. Multimedia Solutions™ is a brand of Vision Products (Europe) Ltd. E & OE.